The Nernst Lamp

Topics related to lamps of all types, shapes, sizes and colours!
Post Reply
User avatar
ATL Admin
Posts: 1312
Joined: Sun Jan 02, 2011 7:19 pm
Favourite Manufacturer: Thorn
Area of interest: Fluorescent battens and Thorn Vintage
Oldest item: 1890's Carbon Lamp
Location: Oxfordshire

The Nernst Lamp

Post by Paul » Sun Jun 17, 2018 7:36 pm

Intrigued by Gav's picture of a Nernst lamp on the gallery, I was keen to find out how they worked. Having looked around online, this is what I can find:

The Nernst lamp (also known as an incandescent "glower" lamp) uses a small ceramic rod, heated to incandescence, to provide light.
The ceramic glower is not enclosed in a glass envelope as it does not oxidize like metal and does not need to be run in a special atmosphere.
The glower in the lamp could be replaced and often outlasted incandescent lamps of the era, making it popular in places where maintenance was an issue.
The lamp has a simple resistive ballast in the base, consisting of a resistor wire in a glass bulb.
Electricity is applied to the heater tubes, sat adjacent to the glower, which raise in temperature to the point of glowing slightly red.
This heated the glower until it reached a temperature where the resistivity of the glower material dropped to the point where current would begin to flow through it. A contactor or switch would cut the power to the heater tubes, leaving power to run through only the glower.

The Nernst lamp produced a nice, almost of daylight appearance light, close to natural daylight in spectral terms.

User avatar
ATL Admin
Posts: 887
Joined: Mon Jan 03, 2011 5:39 pm
Favourite Manufacturer: Pre 1993 Thorn
Area of interest: Fluorescent and Discharge Lighting
Oldest item: One of a few pip top lamps!
Location: Oxfordshire

Re: The Nernst Lamp

Post by Tom » Sun Jun 17, 2018 7:42 pm

What an interesting concept! I believe it was quite short lived and was soon displaced by both incandescent arc and discharge lamps?

User avatar
Posts: 1034
Joined: Wed Jun 29, 2011 11:20 am
Favourite Manufacturer: PHILIPS and VOSSLOH SCHWABE
Area of interest: HID and Associated control gear
Oldest item: Philips 160W MBT/U 1951
Location: Cheshire

Re: The Nernst Lamp

Post by LinearSLI-H » Sun Jun 17, 2018 11:10 pm

That does sound slightly ahead of its time :shock:, love to see one working first hand.

User avatar
Posts: 39
Joined: Tue May 02, 2017 10:31 pm
Oldest item: Cryselco Carbon

Re: The Nernst Lamp

Post by WHERESTHECUEBALLGOIN » Wed Jun 20, 2018 1:29 pm

In Andrew Pullen (the “globe collector”) short movie you can see him “blowing out” a lamp that looks like a Nernst lamp.

Post Reply